5
Position of clean water pump shown (It is recommended to clean every 3 months to
extend the service life.)
6
After feeding water or cleaning the
water tank, install the water pump
module in the water tank. Insert front
hook into the slot of the water tank,
and then rotate rotary knob in “—”
shape clockwise for 90°, and close it
as shown in the figure.
7
Push the water tank inside slowly,
and stir the water tank buckle to lock
it up.
Remove the
filter
Rotary knob
in “—” shape
Insert front hook
into the slot
10
EN
To Next Page
Loading...
