Midea Aqua Tempo Super II Series - Page 6

1 Aqua Tempo Super II
201902 7
Part 1 - General Information
4.2 Aqua Tempo Super II Leaving Water Temperature (LWT) Selection
The recommended design LTW ranges for different types of heat emitter are:
 For floor heating: 30 to 35⁰C
 For fan coil units: 30 to 45⁰C
 For low temperature radiators: 40 to 50⁰C
4.3 Optimizing System Design
To get the most comfort with the lowest energy consumption with Aqua Tempo Super II, it is important to take account of
the following considerations:
 Choose heat emitters that allow the heat pump system to operate at as low a hot water temperature as possible
whilst still providing sufficient heating.