Coolin/Fan operation
MODE
TEMP UP/DOWN
FAN
Ensure the unit is plugged in and power is
available.
1.
Press the button to select Cool or
Fan mode.
3. Press the button to set the
desired temperature.
4. Press the button to select the fan
speed.
Press the button to start the air
conditioner.
2.
ON/OFF
In Fan mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 2 and 4 may be performed.
NOTE
How to use the buttons
Auto operation
MODE
TEMP UP/DOWN
Ensure the unit is plugged in and power is
available.
1.
Press the button to select Auto.
3. Press the button to set
the desired temperature.
Press the button to start the air
conditioner.
2.
ON/OFF
3
4
2
1. In the Auto mode, the air conditioner can logically
choose the modes of Fan and Cooling
by sensing the
e between the actual
ambient room temperature and the set temperature
on the remote controller.
2. You cannot change the fan speed in auto mode.
it has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
1
3
3
2
1
3
3
2
1
3
2
1
2
Dehumidifying operation
Ensure the unit is plugged in and power is
available.
1. Press the ON/OFF button to start the air
conditioner.
2. Press the MODE button to select Dry.
3. Press the TEMP UP/DOWN button to
set the desired temperature.
NOTE
In the Dehumidifying mode, you cannot change the
fan speed. It has already been automatically
controlled.
Timer operation
Press the Timer button to set the Auto-Start
and Auto-stop time of the unit. Auto-start/ Auto-stop
programs can be set from 0-12 hours.
NOTE:
To set Auto-start time, the unit must be in the
position.
To set Auto-stop time, the unit must be in the
On postion.
To set the Auto-start/stop time.
1. Press the TIMER button, when the TIMER
ON indicator displayed on the LED window
of the air conditioner, it indicates the Auto
Start setting program is initiated. When the
TIMER OFF indicator displayed on the LED
window of the air conditioner, it indicates the
Auto Stop setting program is initiated.
2. Press or hold the Up( ) or Down( ) to
change the Auto time. The control will count
down the time remaining until start/stop.
11 12
To Next Page
Loading...
Need help?
General