2
4. OSC KEY:
This key serves to start or stop the fan oscillation.
5. ON/SPEED KEY:
This key is for switching on the fan. Operation begins at medium speed. After 2
seconds it will automatically change to low speed.
After the fan has started, this key serves as a speed selector in
the sequence from LOW to MEDIUM to HIGH.
c. How to Adjust the Wind:
Swing the fan body slightly to the desired left or right direction.
d. Remote Control Operation:
The keys on the remote control serve the same functions as their
corresponding buttons on the control panel.
INSERT BATTERIES
1. Press down on the battery compartment cover and slide it out.
2. Insert the batteries, making sure that the positive terminals are facing the proper
direction marked inside the battery
compartment.
3. Close the cover by sliding it in.
Notes: Use size "AAA" alkaline or standard
(carbon-zinc) batteries. Do not mix old and
new batteries. Do not mix alkaline, standard
(carbon-zinc), or rechargeable (nickel
cadmium) batteries.
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.
Thoroughly remove soap film with clean water.
3. To disassemble each part, reverse the order of assembly.
4. Be sure not to make water or other liquid enter the inside of motor.
CUSTOMER SERVICE
Midea USA, Inc.
2617 North Great Southwest Parkway
Grand Prairie, TX 75050
Toll Free Phone: 866-876-4332
Tower Fan
Owner’s Manual
Model: FS10-S4R
READ AND SAVE THESE
INSTRUCTIONS
PRINTED IN CHINA
To Previous Page
Loading...
Need help?
General
