© 2021. Midea UK Copyright LTD.
SW8/SW5 – Twin Split Setting
16
Both Master (first one connected to the condenser) and Slave need their status set
using SW8 –
Master SW8/SW5 Bit 1 ON
Slave SW8/SW5 Bit 1 & 2 ON
Slave units will do exactly what the Master is set for and become totally ignorant to
any form of control. Therefore no settings or controller wiring (remote on-off/central
controller address and wiring etc) need to be changed or added to the slave
Hard wired controllers only need to be wired to Master
To Next Page
Loading...