Midea GAIA Series - How to Use Advanced Functions

08
How to Use Advanced Functions
Swing function
Press Swing button
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Model dependent)
2s
Swing
Swing
LOCK function
Boost
5s
5s
+
Press together Boost button and button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
BOOST Function
Press Boost button
Boost
When you select Boost feature in COOL mode, the unit will
blow cool air with strongest wind setting to jump-start the
cooling process.
When you select Boost feature in HEAT mode, the unit will
blow heat air with strongest wind setting to jump-start the
heating process(some units).
For units with Electric heat elements, the Electric HEATER
will activate and jump-start the heating process.
Airflow direction
If continue to press the SWING button, five
different airflow directions can be set. The
louver can be move at a certain range each
time you press the button.
Press the button
until the direction you prefer is reached.
Swing