AIR CONDITIONER FEATURES
TO TURN UNIT ON OR OFF:
Press ON/OFF button tot urn u nit o n o r o ff.
This temperature will be automatically maintained
OO OO
anywhere between 62 F(17 C) and 86 F(30 C). If
you want the display to read the actual room
temperature, see To Operate on Fan Only section.
NOTE: The outline of the operation panel is based on typical model, the function is thesame with your air conditioner
while some difference may exist in appearance.
NOTE:The unit will initiate automatically the Energy
Saver function under Cool, Dry and Auto modes.
NOTE: Different models have different control buttons and indicator lights. Not all the control buttons
and indicator lights describing below are available for the unit you purchased. Please check the control
panel of the unit you purchased. The unit can be controlled by the unit control alone or with the
remote.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
TO CHANGE TEMPERATURE SETTING:
Press UP/DOWN button to change
temperature setting.
NOTE:Press or hold either UP or DOWN button
until the desired temperature is shown on the display.
SLEEP FEATURE:
Press Sleep button to initiate the sleep mode. In
this mode the selected temperature will increase
O O
(cooling) or decrease (heating) by 2 F/1(or 2) C 30
minutes after the mode is selected. The temperature
will then increase (cooling) or decrease (heating) by
O O
another 2 F/1(or 2) C after an additional 30 minutes.
This new temperature will be maintained for 6 or 7
hours before it returns to theoriginally selected
temperature. This ends the Sleep mode and the unit
will continue to operate as originally programmed.
The Sleep mode program can be cancelled at any
time during operation by pressing the Sleep button
again.
ENERGY
SAVER
Temp Sensor
19
Fan
Timer
Mode
Off
On
Auto
Cool
Dry
Fan
Auto
Low
Med
High
Temp
Timer
Temp
Timer
On/
Off
Sleep
Check
Filter
Energy
Saver
Temp
Sensor
S
To Next Page
Loading...
