AIR CONDITIONER FEATURES
If the unit breaks off unexpectedly due to the power
cut, it will restart with the previous function setting
automatically when the power resumes.
DISPLAYS:
NOTE:
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure,
here are more features in your control that you should
become familiar with.
The Cool circuit has an automatic 3 minutes time
delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and
possible circuit breaker tripping.The fan will
continue to run during this time.
The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius. To convert
from one to the other, press and hold the Up and
Down buttons at the same time f
or 3 seconds.
CARE AND CLEANING
CAUTION
Clean your air conditioner occasionally to keep it looking
new. Be sure to unplug the unit before cleaning to
prevent shock or fire hazards.
Air Filter Cleaning
For 5000 to 6000 Btu/h
For 6000 to 12000 Btu/h
Remove the filter by
sliding out from the
right-hand side.
O O
Shows the set temperature in " C" or " F" and the
Auto-timer settings.While on Fan only mode,it shows
the room temperature. If the room temperature is too
high or low, it will display " HI" or " LO" .
DISPLAYS:
-Evaporator temperature sensor error
NOTE: " " is displayed as shown in the obove picture.
HS -Electric heating sensor error(on some models);
CS -Condenser temperature sensor error(on some
models);
OS -Outside temperature sensor error(on some models);
E7 -Unit malfunction(on some models).
NOTE:When error occurs,unplug the u
nit and plug
it back in.If error repeats, call for service.
Error codes:
AS -Room temperature sensor error
ES
or
Displays
21
To Next Page
Loading...
