Why is my Midea IM1800 Ice Maker not making ice?
Your Midea Ice Maker might not be producing ice because the freezer temperature is too high. Ensure that the freezer temperature is adequately low. Alternatively, there could be a mechanical issue with components such as the ejector gear, ejector motor, ice mold heater, holding switch, water inlet switch, thermostat, or the water inlet valve. Consider having these components tested.
What to do if the ice tray in my Midea IM1800 is not filling?
If the ice tray in your Midea Ice Maker isn't filling, it could be due to the fill tube not being correctly seated in the fill cup. Ensure the fill tube is properly inserted into the fill cup opening. Another possible cause is a turned-off water supply valve. Make sure the water supply valve is turned on and inspect the water supply line for any issues.
How to fix ice cubes not ejecting from my Midea IM1800 Ice Maker?
If ice cubes aren't ejecting from your Midea Ice Maker, there could be a mechanical problem. Test or have tested components like the ejector gear, ejector motor, the ice mold heater, the holding switch, and the thermostat.
Why does the ice from my Midea IM1800 Ice Maker smell funny or taste bad?
The ice from your Midea Ice Maker might smell funny or taste bad if the ice storage bin or freezer needs cleaning. Empty and wash the ice storage bin, discarding the old ice cubes, and wash the interior of the freezer, removing any old food. Also, the water inlet filter may need replacing, or there could be impurities in the water supply line, so flush out the water supply line.
Why is the ice from my Midea IM1800 Ice Maker discolored?
Discolored ice from your Midea Ice Maker may be due to impurities in the water supply line or the ice mold tray. Flush out the water supply line and clean the ice mold tray. If your refrigerator doesn’t have one, install a water supply line filter.
What to do if my Midea Ice Maker makes too much ice or won't shut off?
If your Midea Ice Maker is making too much ice or won't shut off, the wire signal arm might be jammed. Ensure the ice maker wire signal arm is not jammed and free it if it is. Also, the shutoff switch could be broken and require testing by an appliance technician.
Disconnect the refrigerator from its power source before proceeding.
Take out the freezer shelf and ice tray rack to clear space for installation.
Review pre-connection notes, warnings, and disconnect power before starting.
General| Model | IM1800 |
|---|---|
| Ice Storage Capacity | 1.5 lbs |
| Power Consumption | 120W |
| Ice Type | Bullet |
| Ice Size | Small |
| Noise Level | 45 dB |
To Next Page