7
Ice Maker
4
Remove the terminal protection cover in the upper left corner of
the freezer compartment, take out the screw and semi-x it at the
positioning counterbore surface above the left side of the freezer
compartment, then insert the power terminal of the ice maker
main body into the socket with the upper left corner aligned, and
nally suspend the ice maker main body integrally on the
semi-xed screw.
5
Correct the space horizontal position for the installation of the ice
maker main body and hold the refrigerator main body tightly in
this position to ensure its verticality. Then tighten the xing screws
of the ice maker main body.
The installation position of
the ice maker is required to
press the side edge and its
orientation is horizontal and
vertical
RESET
CLEAN
ON
OFF
Fixing screws
Insert ice maker terminals
Remove the refrigerator
terminal cover
To Next Page
Loading...