To Next PageTo Next Page
Need help?Do you have a question about the Midea MCA-36HRN2 and is the answer not in the manual?
General| Cooling Capacity | 36000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Outdoor Unit Noise Level | 56 dB(A) |
| Type | Split System Air Conditioner |
| Power Supply | 220-240V, 50Hz |
| Air Flow (Indoor) | 1200 m3/h |
| Operating Temperature (Cooling) | 18-43 °C |
Installation and servicing of air conditioning equipment can be hazardous. Only trained personnel should perform operations.
Lists various installation components like hooks, bolts, and paper boards.
Details connecting pipe groups, binding tape, and soundproof/insulation sheath.
Encompasses out-let pipe sheath, clasp, tightening band, drain elbow, and seal ring.
Includes wall conduit and cover for pipe protection.
Covers power wiring of the indoor unit and weak electrical wiring.
Lists remote controller, frame, mounting screws, and batteries.
Includes owner's manual and installation manual.
Lists locations that may cause machine malfunction, such as places with oil, salt, or gas.
Provides guidance on selecting carry-in path, moving units, and electrical insulation.
Details requirements for indoor unit installation space and airflow.
Outlines requirements for outdoor unit placement, ventilation, and noise considerations.
Instructions for cutting ceiling holes and installing the main indoor unit body.
Advises on placement away from sun/heaters, wind protection, and proximity to indoor unit.
Details required clearances for outdoor unit installation and maintenance.
Safety precautions for lifting, moving, and securing the outdoor unit.
Checks height drop, pipe length, bends, and warns against impurities in the pipe system.
Steps for measuring, bending, connecting pipes, and expelling air.
Guidelines for bending refrigerant pipes to prevent damage or collapse.
Instructions for selecting, attaching, and securing the drainpipe for the indoor unit.
Procedure for testing the drainpipe for blockages and leaks using water.
General safety precautions for wiring, including power supply, ground wiring, and qualified personnel.
Details power specifications like phase, frequency, voltage, and wire sizes for different models.
Steps to remove the protection board from the outdoor unit for wiring access.
Checks remote controller function, airflow, temperature adjustment, indicators, and drainage.
Checks outdoor unit for vibration, noise, and refrigerant leaks.
