Midea MCA3-18HRN1-Q

Indoor unit installation
194
3.1.5
Remove the grille
Hang the panel to the hooks on the mainbody.
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
water
Indoor unit installation
194
3.1.5
Install the panel
Remove the grille
Hang the panel to the hooks on the mainbody.
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
water
.
Indoor unit installation
Install the panel
Remove the grille
Hang the panel to the hooks on the mainbody.
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
Hang the panel to the hooks on the mainbody.
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
Hang the panel to the hooks on the mainbody.
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
Installation
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate
Installation
Tighten the screws under the panel hooks till the panel closely stick on the ceiling to avoid condensate