Midea MCA3-18HRN1-Q User Manual

Controller
256
10
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
will cancel time ON setting.
1
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
temperature for you.
1
set time exceed
Adjust the figure to 0.00 will cancel time ON setting.
1
not accept any operatio
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
will appear on the remote controller display when the lock function is a
14.
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
PTC heater is energized and brings st
3.1.3
Remote Controller Specifications
Introduction of Function Buttons on the Remote Controller
1.
2. Adjust
Controller
256
10. TIME ON:
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
will cancel time ON setting.
1
1.
SLEEP Button
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
temperature for you.
1
2
. TIME OFF:
set time exceed
Adjust the figure to 0.00 will cancel time ON setting.
1
3. LOCK
(inner located): Push this button to lock in all the current settings, and the remote controller will
not accept any operatio
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
will appear on the remote controller display when the lock function is a
14.
TURBO Button
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
PTC heater is energized and brings st
3.1.3 R51M/(C)E
Remote Controller Specifications
Environment Temperature Range
Introduction of Function Buttons on the Remote Controller
1.
Adjust
2. Adjust
. TIME ON:
For time ON setting. Once pressing this button, the time will i
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
will cancel time ON setting.
SLEEP Button
:
Press this button to activate the Energy
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
temperature for you.
. TIME OFF:
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
set time exceeds 10 hours, pressing the button will increase the time by 1 hour.
Adjust the figure to 0.00 will cancel time ON setting.
(inner located): Push this button to lock in all the current settings, and the remote controller will
not accept any operation except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
will appear on the remote controller display when the lock function is a
TURBO Button: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
PTC heater is energized and brings st
R51M/(C)E
Remote Controller Specifications
Model
Rated Voltage
Reaching Distance
Environment Temperature Range
Introduction of Function Buttons on the Remote Controller
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
For time ON setting. Once pressing this button, the time will i
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
will cancel time ON setting.
Press this button to activate the Energy
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
s 10 hours, pressing the button will increase the time by 1 hour.
Adjust the figure to 0.00 will cancel time ON setting.
(inner located): Push this button to lock in all the current settings, and the remote controller will
n except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
will appear on the remote controller display when the lock function is a
: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
PTC heater is energized and brings st
Remote Controller Specifications
Model
Rated Voltage
Reaching Distance
Environment Temperature Range
Introduction of Function Buttons on the Remote Controller
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
For time ON setting. Once pressing this button, the time will i
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
Press this button to activate the Energy
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
s 10 hours, pressing the button will increase the time by 1 hour.
Adjust the figure to 0.00 will cancel time ON setting.
(inner located): Push this button to lock in all the current settings, and the remote controller will
n except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
will appear on the remote controller display when the lock function is a
: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
PTC heater is energized and brings stronger and faster heating operation.
Environment Temperature Range
Introduction of Function Buttons on the Remote Controller
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
For time ON setting. Once pressing this button, the time will i
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
Press this button to activate the Energy
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
s 10 hours, pressing the button will increase the time by 1 hour.
Adjust the figure to 0.00 will cancel time ON setting.
(inner located): Push this button to lock in all the current settings, and the remote controller will
n except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
will appear on the remote controller display when the lock function is a
: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
ronger and faster heating operation.
Introduction of Function Buttons on the Remote Controller
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
For time ON setting. Once pressing this button, the time will i
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
Press this button to activate the Energy
-
Saving mode. Press again to
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
s 10 hours, pressing the button will increase the time by 1 hour.
(inner located): Push this button to lock in all the current settings, and the remote controller will
n except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
will appear on the remote controller display when the lock function is activated.
: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
ronger and faster heating operation.
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
For time ON setting. Once pressing this button, the time will increase by 0.5 hour. When the
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
Saving mode. Press again to
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
s 10 hours, pressing the button will increase the time by 1 hour.
(inner located): Push this button to lock in all the current settings, and the remote controller will
n except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
ctivated.
: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
ronger and faster heating operation.
R51M/(C)E
3.0V
8m
-5℃～
60
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
Electrical
ncrease by 0.5 hour. When the
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
Saving mode. Press again to stop the function.
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
(inner located): Push this button to lock in all the current settings, and the remote controller will
n except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
R51M/(C)E
3.0V
8m
60
℃
: Decrease the set temp. Keeping pressing will decrease the temp with 1
℃
per 0.5s.
: Increase the set temp. Keeping pressing will increase the temp with 1
℃
per 0.5s.
Electrical
Control
ncrease by 0.5 hour. When the
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
stop the function.
This function is available on COOL, HEAT or AUTO mode only and maintain the most comfortable
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
(inner located): Push this button to lock in all the current settings, and the remote controller will
n except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the
per 0.5s.
per 0.5s.
Control
ncrease by 0.5 hour. When the
set time exceeds 10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00
stop the function.
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the
(inner located): Push this button to lock in all the current settings, and the remote controller will
n except that of the LOCK. Use the LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK button again to cancel the LOCK function. A lock symbol
: Push this button to activate the speed cooling function(Speed cooling operates at super
high fan speed in cooling mode). For the unit adopts PTC, when press TURBO button in heating mode, the

Midea MCA3-18HRN1-Q Specifications

General

Brand	Midea
Model	MCA3-18HRN1-Q
Category	Air Conditioner
Language	English