Midea MDRE353FGF Series - Page 13

6)Remove the the upper hinge of freezer door.
7)Remove the freezer door, the bottom hinge and the hole caps.
4)Exchange the R:bottom hinge and R:upper hinge ,then install them according to below steps,
and install the top hole caps.
5) of refrigerator door them for 180°，
refrigerator door
Remove the two fixed blocks and rotate
and install them on other side of .
F:upper hinge
F:bottom hinge
hole caps
R:bottom hinge
hole caps
fixed block
R:upper hinge
180°
Step 1:
install l eft botto m hinge
Step2:
put refri gerator
door on lef t bottom
hinge ver tically
Step 3:
install l eft upper h inge
11