6）
Click temperature adjusting button , freezer compartment temperature will blink .
Then click the button or again to set the temperature, and you will hear one beep.
Setting scope is between -16°C and -24°C. Every time you click the button, the temperature will be
changed1°C, New temperature setting will take effect after locking the control panel.
Temperature setting of freezing chamber
5）Temperature setting of refrigerating chamber
Click temperature adjusting button , refrigerating compartment temperature will blink.
Then click the button or again to set the temperature, and will hear one beep. Setting
scope is between 2°C and 8°C.Every time you click the button, the temperature will be changed 1°C.
After adjusting, New temperature setting will take effect after locking the control panel.
7）Storage upon power failure
In case of power failure, the instant working state will be locked and maintained till re-electrification.
8）Opening warning and alarm control
when open the refrigerator doors, the opening music will play.
9） Error code
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though
the refrigerator may still have cold storage function with the following faults, the user shall contact a
maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.
Error Code
E1
E2
E5
Fault Description
E7
E6
Communication error
Ambient temperature sensor error
Temperature sensor failure
Freezing defrost detection
circuit error
sensor
Temperature sensor failure
of refrigerating chamber
of freezing chamber
Recommended setting: Refrigerated chamber 4 ℃, freezing chamber - 18 ℃.
E一
Radar temperature senor failure
E二
Radar temperature senor failure
To Next Page
Loading...
