07
EN
OPERATION INSTRUCTIONS
Control panal
Display
1
Locking and unlocking
4
Temperature-rise key
2
Lighting key
5
Temperature-drop key
3
Display area
* The actual control panel may differ from model to model.
Display Control
• When power-on the cooler, the display screen will display in full last for 3
seconds,and the start-up tone will ring, and then enter into the display of
normal operation;
• Normal operation display: In case of no failure, set temperature is displayed; In
case of failure, error code is displayed;
This cooler adopts the touch control of the glass door. Touch slightly when pressing the keys.
It is to be avoided that the area of the display panel is scratched by the sharp things and it
shall be kept away from the environment of high magnetic eld and high humidity. Otherwise
the cooler is possible not to be set and operate normally.
Locking and unlocking
• Under the locked state, long press the “Lock key ( )” continuously for 3
seconds, the locking will be relieved; the display area will blink;
• Under the unlocked state, long press the “Lock key ( )” continuously for 3
seconds to enter into the locked state.
Except the lighting function, the following operations only be able to carried out under the
unlock state.
ATTENTION
To Next Page
Loading...