Instructions
10
1
Turn on the power, then touch a button to select the corresponding function and
touch “ Start ” button to let the machine run for preheating.
2
After the preheating is completed, the machine will beep and dispaly shows “Add
food”, hold the top of the machine with one hand, and pull the barrel out by holding
the handle of the barrel with the other hand. The barrel must be placed on a stable
table.
3
Put the ingredients on the bakware or basket in the fried barrel.
4
Push the frying barrel into the machine, after the machine is powered on, it will
continue to work and the interface shows the set time or DIY through the control panel
to set the certain temperature and time, then touch “ Start ” button to start. Then the
machine enters the heating work state, cooks and heats the food material.
NOTE
• When the frying barrel is not thoroughly pushed in the micro switch is not triggered;
the machine is at the power-off state of getting the barrel and it won’t work. At that
time, you only need to totally push the frying barrel into the machine. The machine has
the fuction of 10 minutes power off memory. After taking out of the frying barrel and
stirring the food in the process of food cooking, fully push the frying barrel into the
machine and the machine restores the working state when the frying barrel is not
taken out, and continues to cook and heat the food materials.
To Next Page
Loading...
Need help?
General
