3 OPERATION
28
Child Lock
This function is meant to keep children from misusing the controls.
Press [ ] simultaneously for 3 sec
until the buzzer beep. The child lock indicator switches
on.
3s for Child Lock
Caution!
When the Child Lock is activated, the display will alternately show
“CL” and the remaining time.
Pressing any other button will cause the Child Lock indicator to
flash. When the program ends, “CL” and “END” will
alternate on the display.
The Child Lock deactivates the function of all buttons except the
On/Off button and the Child lock button!
Only the simultaneous pressing of the button [3s for Child
Lock] can deactivate the Child Lock!
Please deactivate the Child Lock before selecting a new
program!
Press the [Extra Rinse]button for 3sec.
to mute the buzzer.
Mute the buzzer
To act the buzzer function, press the button again for 3 seconds. The
setting until the next reset.
will be kept
Start
To Next Page
Loading...
