17
Description
The table below shows which programs are best for the levels of food residue
on them and how much detergent is needed. It also show various information about
the programs. Consumption values and program duration are only indicative except
for the ECO program.
Programmes
( )indicates that the program uses rinse aid in the last rinse.
Hygienecare+
●
●
Glass
●
90 min
Rapid
●
●
Universal
No.8
Program
No.9
Screen
●
●
●
This is standard program, it is suitable to clean
normally soiled tableware and it is the most efficient
program in terms of its combined energy and water
consumption for that type of tableware.
Use to sanitize your dishes and glassware. The
highest water temperature is 72°C.
For normally soiled loads, such as pots, plates,
glasses and lightly soiled pans.
For lightly soiled crockery and glass.
For normally soiled loads that need quick wash.
Salt
Soak
●
To rinse dishes that you plan to wash later that day.
Whisper
●
Lower noise and normally energy consumption, used
for washing in evening.
A shorter wash for lightly soiled loads that do not
need drying.
If the “ ” indicator is lit, it means the dishwasher is
low on dishwasher salt and needs to be refilled.
●
Rinse Aid
If the “ ” indicator is lit, it means the dishwasher is
low on dishwasher rinse aid and needs to be refilled.
●
Water Faucet
If the “ ” indicator is lit, it means the water faucet
closed.
IntensiveCare+
●
●
●
To show the reminding time, delay time, error code
etc.
For the heaviest soiled crockery, and normally soiled
pots, pans, dishes etc. With dried-on food.
This program provides an effective cleaning of the
dishwasher itself.
MachineCare+
●
To dry dishes more completely. ( It can only be used
with Universal, ECO, Glass, 90 min)
No.10
Cloud
wash
ECO
No.7
To start the selected washing program or pause it
when the dishwasher is working.
Start/Pause
Extra Drying
To Next Page
Loading...
