EasyManua.ls Logo

Midea MDT24H3AST - User Manual

Midea MDT24H3AST
136 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Dishwasher
version A - 11 - 2019
MODEL NUMBER MDT24H3AST
www.midea.com
USER MANUAL
en
Warning:
Before using this product,
please read this manual carefully
and keep it for future reference.
The design and specifications
are subject to change without
prior notice for product
improvement. Consult with your
dealer or manufacturer for
details.
Power supply: 120 V
Rated power: 1000 W
Frequency: 60Hz
Capacity: 14 Place Settings

Table of Contents

Questions and Answers

  • R
    Rhonda HarrisonAug 13, 2025
    Why my Midea Dishwasher does not run?
    • C
      Caleb GuzmanAug 13, 2025
      If your Midea Dishwasher isn't running or stops mid-cycle, here are a few things to check: * First, ensure the dishwasher has power by checking the fuse or circuit breaker and replacing or resetting if necessary. * Make sure the door is fully closed and latched. * Verify that the water shutoff valve is turned on and that the water pressure is at least 20 psi during filling. * Also, confirm that the Control Lock feature is deactivated and the door was closed within 4 seconds of pressing START. If the Delay feature is selected, this is normal to reduce energy consumption.
  • D
    Daniel TateAug 17, 2025
    How to prevent food residue on dishes in my Midea MDT24H3AST Dishwasher?
    • L
      Larry BentleyAug 17, 2025
      If you find food residue on your dishes after a Midea Dishwasher cycle, several factors could be the reason. Ensure the dishwasher is loaded correctly, and select the appropriate wash cycle for the level of soil on the dishes. The incoming water should be at least 120°F (49°C). Use a minimum of 1 Tbsp. (15 g) of fresh detergent per load, adjusting the amount for heavy soil or hard water. Inspect the pump and spray arm for any clogs from labels. Also, ensure your home's water pressure is between 20 to 80 psi (138 to 552 kPa) for proper filling. High suds can also slow the wash arm, so use only recommended detergents.
  • S
    Sandra GonzalezAug 21, 2025
    How to remove spotting from Midea MDT24H3AST?
    • P
      Patricia GonzalezAug 21, 2025
      If you're seeing spotting and filming on dishes from your Midea Dishwasher, it might be due to an empty Rinse Aid dispenser. Try adding a liquid rinse aid to the dispenser. Hard water or high mineral content can also cause this issue; increase the rinse aid dispenser setting by one number per cycle until spotting is eliminated. Ensure the water entering the dishwasher is at least 120°F (49°C), and use at least 1 Tbsp. (15 g) of detergent per load, adjusting for heavy soil or hard water.
  • J
    john43Aug 25, 2025
    Why is detergent left in my Midea MDT24H3AST Dishwasher dispenser?
    • J
      Joel HornAug 26, 2025
      If detergent remains in the dispenser of your Midea Dishwasher, first ensure the cycle has completed by closing the door and pressing START. The detergent might be damp or clumped, so replace it with fresh, dry dishwasher detergent. Also, make sure no items are blocking the dispenser or the spray arm's rotation.
  • W
    Willie HuntAug 28, 2025
    Why does my Midea MDT24H3AST run so long?
    • M
      murphyjoseAug 28, 2025
      If your Midea Dishwasher seems to run too long, it could be due to several reasons. Make sure the water supplied to the dishwasher is hot enough by running the water in the sink until it gets hot before starting the dishwasher. The dishwasher may run longer to heat the water to the correct temperature, especially if the Sanitize option is selected or heavy soil is detected. Ensure the dishwasher is connected to the hot water supply, and that the drain hose is not kinked. Also, if connected to a garbage disposal, make sure the knockout plug is removed and the disposal is empty. Check the air gap for clogs, and remember the water will drain when the cycle is completed.
  • W
    William HardinSep 1, 2025
    What to do if dishes are not drying in Midea MDT24H3AST Dishwasher?
    • N
      Natasha McneilSep 1, 2025
      If your dishes are not completely dry after a Midea Dishwasher cycle, ensure dishes are loaded properly to allow water drainage, avoiding overloading. Use a liquid rinse aid to speed drying and keep the dispenser full. If you're using an air dry or energy-saving option, select a cycle that includes a heated dry option for dryer dishes.
  • R
    Richard CalderonSep 5, 2025
    Why is my Midea Dishwasher making grinding noises?
    • R
      Robert MillerSep 5, 2025
      If you hear grinding, grating, crunching, or buzzing sounds from your Midea Dishwasher, it could be due to a hard object or detergent granules in the wash module. Carefully remove any hard objects, using caution as clear glass can be hard to see in water. Ensure you are using only detergent approved for automatic dishwashers to avoid excessive suds. Also, check if the dishwasher is level and add liquid rinse aid if the level is low. Note that some sounds are normal, indicating the wash cycle is completed.
  • M
    Mark GibsonSep 9, 2025
    How to stop Midea MDT24H3AST Dishwasher from chipping dishes?
    • D
      Donna RodriguezSep 9, 2025
      If dishes are chipped after using your Midea Dishwasher, make sure they are loaded properly, so they are stable and won't strike together during washing. Also, move the rack in and out of the dishwasher slowly to minimize chipping.

Summary

DISHWASHER SAFETY

Grounding Instructions

Provides essential safety information regarding proper grounding of the appliance.

Important Safety Instructions

Details basic precautions to follow when using the dishwasher to prevent injury.

Tip Over Hazard

Warns about the risks associated with tipping the appliance if not installed correctly.

California Proposition 65 Warnings

Lists warnings required by California law regarding potential hazards.

Suffocation Hazard

Highlights the risk of suffocation, especially for children, with old appliances.

OPERATING REQUIREMENTS

Electrical Requirements

Details the necessary electrical specifications for safe dishwasher operation.

Location Requirements

Specifies ideal placement and installation conditions for the dishwasher.

Water Supply Requirements

Outlines the water pressure and temperature needed for optimal performance.

PARTS AND FEATURES

Component Identification

Identifies key parts of the dishwasher through a labeled diagram.

Filter System

Explains the multi-filter system for improved performance and efficiency.

Smart Wash System

Describes the intelligent system that adjusts cycles based on soil level.

Adjustable Upper Rack

Details the feature allowing height adjustment for loading flexibility.

START UP GUIDE

Dishwasher Cleaning Process

Explains how the dishwasher cleans dishes using water and detergent.

Preparation Before Use

Guides on checking filters and adding rinse aid before the first use.

Initial Dishwasher Operation

Provides step-by-step instructions for the first time using the dishwasher.

CONTROLS

Control Panel Overview

Introduces the main controls including Power and Cycle selection.

Advanced Features and Options

Explains special options like Sanitize, Hi Temp, Heated Dry, and Delay Start.

Indicator Lights and Status

Describes the meaning of LED indicator lights for cycle progress and error alerts.

Cycle and Option Charts

Provides tables detailing cycle options and water usage for different cycles.

DISHWASHER LOADING

Dish Preparation and Loading Tips

Guides on preparing dishes and general loading advice for optimal cleaning.

Upper Rack Loading and Adjustment

Details on adjusting the upper rack height and loading items in the upper rack.

Lower Rack Loading and Tine Adjustment

Instructions for loading the lower rack and adjusting the fold-down tines.

Silverware and Load Pattern Guidance

Covers loading silverware, third rack, and provides recommended load patterns.

DISHWASHER USE

Detergent Usage and Dispenser

Instructions on using automatic detergent and operating the detergent dispenser.

Rinse Aid Application

Guidance on using liquid rinse aid and filling the rinse aid dispenser.

Washing Special Items

Information on washing various materials and items, including limitations.

DISHWASHER CARE

Exterior and Interior Cleaning

Procedures for cleaning the dishwasher's exterior, interior, and door gasket.

Filter and Drain Air Gap Maintenance

Instructions for cleaning the dishwasher filters and the drain air gap.

Storage and Winterization

Guidance on preparing the dishwasher for storage or winter conditions.

TROUBLESHOOTING

Dishwasher Not Operating Properly

Addresses issues like not running, stopping, or not filling correctly.

Unusual Sounds and Leaks

Covers noise issues, suds, leaks, and rinse aid indicator light.

Cleaning and Drying Issues

Diagnoses problems with food residue, spots, stains, and incomplete drying.

Error Codes and Damage

Explains error codes, potential damage to dishes, and troubleshooting steps.

Midea MDT24H3AST Specifications

General IconGeneral
StyleFree-Standing
ColorStainless Steel
Load Capacity14 Place Settings
Number of Cycles6
Cycle SelectionsHeavy
Options/SettingsSmart Control (Wi-Fi App)
Drying TypeExtended Dry (2 Fan Assisted)
Temperature Options-
Noise level45 dBA
Special FeaturesSingle Touch Programming
Energy Class-
Annual Energy Consumption260 - 270 kWh
Energy Consumption Per Cycle1.039 kWh
Annual Water Consumption-
Water Consumption Per Cycle-
Voltage120V
Frequency60 Hz
Current-
Weight and Dimensions IconWeight and Dimensions
Depth24.5 in
Height33.8 in
Width23.9 in
Net Weight110.3 lbs

Related product manuals