Midea MDT24H3AST User Manual

7
Safety
Precautions
Operating
Requirements
Parts and
Features
Start Up
Guide
Controls
Dishwasher
Loading
Dishwasher
Use
Dishwasher
Care
Troubleshooting
OPERATING REQUIREMENTS
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
•
Electrically ground dishwasher.
•
Connect ground wire to green ground connector in terminal box.
•
Do not use an extension cord.
•
Failure to follow these instructions can result in death, fire, or
electrical shock.
This dishwasher is designed for operation on an adequately wired
individual 120 V, 60 Hz, 15- or 20-amp fused electrical supply with copper
wire only. It is recommended that a time-delay fuse or circuit breaker is
used, and that a separate circuit serving only this appliance is provided. If
an outlet is used, the outlet should be placed in adjacent cabinet.
LOCATION REQUIREMENTS
•
Install where dishwasher is protected from the elements. Protect
against freezing to avoid possible rupture of fill valve. Such ruptures
are not covered by the warranty. For winter storage information, see
“Storing” in the “Dishwasher Care” section.
•
Install and level dishwasher on a floor that will hold the weight and in
an area suitable for its size and use.
WATER SUPPLY REQUIREMENTS
•
The water supply temperature should be 120°F to 150°F (49°C to
66°C).
•
The water supply must maintain water pressure between 20 and 80 psi
for sufficient flow.

Midea MDT24H3AST Specifications

General

Style	Free-Standing
Color	Stainless Steel
Load Capacity	14 Place Settings
Number of Cycles	6
Cycle Selections	Heavy
Options/Settings	Smart Control (Wi-Fi App)
Drying Type	Extended Dry (2 Fan Assisted)
Temperature Options	-
Noise level	45 dBA
Special Features	Single Touch Programming
Energy Class	-
Annual Energy Consumption	260 - 270 kWh
Energy Consumption Per Cycle	1.039 kWh
Annual Water Consumption	-
Water Consumption Per Cycle	-
Voltage	120V
Frequency	60 Hz
Current	-

Weight and Dimensions

Depth	24.5 in
Height	33.8 in
Width	23.9 in
Net Weight	110.3 lbs