INSTRUCTIONS FOR USE
5
Personal blender
1 2
3
Fill the bottle with your favorite ingredients. Be sure not to fill ingredients over he
600mL marking.
Fasten the blade assembly on the open end of the bottle.
Turn the bottle upside down, line up arrow “●”on the blade assembly to the lock
“ ” on the base, place the bottle in the base by pressing and simply turn the
bottle clockwise to lock “●” on the base.
Place the blender base on a flat surface and plug in it. Pressing switch, the
blender will start to work, release switch to stops working.
After the in gredients are fully blended, stop the blender working, and turned
counterclockwise rotation the bottle , take out the bottle form the base.
Replace the blade assembly to use.
1.
2.
3.
4.
5.
6.
9
4 5
7 8 9
6
To Next Page
Loading...
