03
Read the instructions, keep them safe, pass them on if
you pass the appliance on. Remove all packaging before
use.
• Don’t put the motor unit in liquid, don’t use it in a ...
bathroom, near water, or outdoors.
• Unplug before fitting or removing an attachment.
• Switch off(0) before fitting the jug to the motor unit.
• Switch off(0) and wait till the blades come to a
complete stop before removing the lid from the jug.
• Keep your hands away from the blades – they’re sharp.
• Don’t use the appliance unless the lid is in place.
• Don’t fill with anything hotter than you can
comfortably handle (i.e. below 40°C).
• Don’t put spoons, spatulas, or any other object
into the jug while the appliance is plugged in.
• Don’t leave the appliance unattended while plugged in.
• Sit the motor unit on a dry, firm, level surface.
• Route the cable so it doesn’t overhang, and can’t be
tripped over or caught.
• Don’t let the jug overflow. If liquid gets under the
motor unit, it may be sucked into the motor, damaging
it.
• Don’t fill the jug above the max mark – if you do, the
contents may force the lid open when you start the
motor.
• You may use the processor and disc for
cutting/grating for up to 2 minutes. Any other use
should be restricted to 1½ minutes. After this, let the
motor rest for 2 minutes.
• Don’t use the appliance for any purpose other than
those described in these instructions.
Follow basic safety precautions, including:
IMPORTANT SAFEGUARDS
To Next Page