Abnormality Analysis and Troubleshooting
異常处理
Abnormality Handling
1.产品如出现 常情况如: 常噪音、气味、烟雾等,应立即切断电源,停止使用。異 異
2.如出现产品不能工作:请检查电源是否连接好,开关是否调至开的位置,配件是否装
到位
3.如经上述检查,产品还是不能工作,请到指定的维修中心维修和咨询.
Once the abnormal conditions occur, such as abnormal noise, odors and smoke, disconnect the
power and stop using the product.
If the product does not work: please check whether the power supply is connected, the switch is on
and the accessories are assembled in place.
If the product still does not work after the examination, please go to the designated customer
center for customer and consultation.
14
To Next Page
Loading...