Midea MLC31N5AWW

11
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the
SAFETY INSTRUCTIONS before operating this appliance.
WARNING
Connect to grounded 3-prong outlet with an individual 12 amp branch
circuit protected by a 12 amp circuit breaker.
Connect to individual branch circuit.
Do not remove the ground prong.
Do not use an adapter.
You must ground your washer. In the event of a malfunction or
breakdown, grounding reduces the risk of electric shock by providing
a path of least resistance for the electric current.
A 120 v, 60 Hz, AC-only,15 or 20 amp, fused electrical supply is
required. We recommend that you use a time-delay fuse or provide a
circuit serving only your washer.
Your washer is equipped with a power cord that has a 3-prong
grounding plug. To minimize possible shock hazard, the cord must be
plugged into a matched 3-prong, grounding type outlet, grounded in
accordance with local codes and ordinances. If a 3-prong outlet is not
available, contact a qualified electrician to install one. Do not use an
adapter.
If codes permit and you use a separate ground wire, we recommend
that a qualified electrician determine that the ground path is adequate.
Check with a qualified electrician if you are not sure your washer is
correctly grounded.
Do not have a fuse in the neutral or ground circuit.
Certain internal parts are intentionally not grounded and may present
a risk of electric shock only during servicing. When servicing, do not
contact the following parts while the appliance is energized: electrical
valve, drain pump and door lock.
INSTALLATION REQUIREMENTS
Electrical requirements
Electrical grounding is required for your washer.
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Troubleshooting
•
•
•
•
•
•
•
•
•
•
•
Failure to follow these instructions can result in electrical shock, fire, or
death.