Operation
Requirements
Installation
Instructions
TroubleshootingWasher Use
Washer Care
Washer
Safety
LOADING THE WASHER
Wash drum may be fully loaded with loosely added items. Do not wash
fabrics containing flammable materials (waxes, cleaning fluids, etc.).
To add items after washer has started, press
for 3 seconds and wait
until the door is unlocked, the washer may take up to 30 seconds to
unlock the door. If the water temperature is extra hot, you may not be
able to pause the cycle.
Do not try to force open the door when it is locked. After the door
unlocks, open gently. Add items, close the door and press
to restart.
WASHER CARE
CLEANING
EXTERIOR
Immediately wipe o any spills. Wipe with damp cloth. Do not hit surface
with sharp objects.
INTERIOR
To clean the interior of the washer, select the Washer Clean feature on
the control panel. This cycle should be performed, at a minimum, once
per month. This cycle will use more water, in addition to bleach, to control
the rate at which soils and detergents may accumulate in your washer.
NOTE: Read the instructions below completely before starting the Tub
Clean cycle.
1. Remove any garments or objects from the washer and ensure the
washer basket is empty.
2. Open the washer door and pour one cup or 250 ml of liquid bleach or
other washing machine cleaner into the basket.
3. Close the door and select the Tub Clean cycle. Push the
button.
4. When the Washer Clean cycle is working, the display will show the
estimated cycle time remaining. The cycle will complete in about 90
minutes. Do not interrupt the cycle.
18
To Next Page
Loading...
Need help?
General