11. Before starting the washer, check to make sure:
• Main power is turned on.
• The washer is plugged in.
• The water faucets are turned on.
• The unit is level and all four leveling legs are firmly in the floor.
• The shipping support hardware is removed and saved.
• The drain hose is properly tied up.
12. Run the washer through a complete cycle.
13. If your washer does not operate, please review the Before You Call
For Service section before calling for service.
14. Place these instructions in a location near the washer for future
reference.
13
Washer
Safety
Operation
Requirements
Installation
Instructions
Troubleshooting
Washer Care
Washer Use
To Next Page
Loading...
