Midea MLV41N1AWWC - Page 29

Service manual for Washing Machine Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－ 29 －
E. Water leveling sensor Failure (F8)
Check the water leveling sensor.
Test the electric capacity between
terminal 1 and terminal 2, terminal 2
and terminal 3. If the capacity is not in
range from 40nF to 50nF, replace the
water level sensor.
Test the resistance between terminal 1 and
terminal 3. If the resistance is not in range
from 20 to 40 Ohms, replace the water level
sensor.
Check the harness and
connections.
Replace the PCBs.
1
2
3