Need help?Do you have a question about the Midea MOB01-12HFN1-QRD0GW and is the answer not in the manual?
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 12000 BTU |
| Refrigerant | R410A |
| Power Supply | 115V/60Hz |
| Noise Level | 52 dB |
| Features | Remote Control, Dehumidifier Function, Timer |
Instructions to prevent injury to users and property damage during operation and service.
Critical warnings regarding installation, electrical safety, and product usage to prevent fire, shock, or damage.
Detailed dimensions and specifications for the Midea indoor air conditioner units.
Recommended clearances and space requirements for the Midea outdoor air conditioner units.
Torque values for tightening various pipe connection sizes during installation.
Specifications for selecting power cord cross-sectional area based on appliance current rating.
Standard and maximum pipe lengths and elevation differences for different models, with refrigerant amounts.
Step-by-step guide for initial air purging using vacuum pump and refrigerant.
Procedure for adding refrigerant to systems that have been in use for many years.
Steps for collecting refrigerant and re-installing the system after indoor unit repair.
Procedures for system evacuation and refrigerant charging after outdoor unit repair.
Definitions for temperature sensors (T1-T5) and other abbreviations used in the manual.
Explanation of digital display segments, icons, and Wi-Fi control indicators.
Details on various protection features like compressor restart delay, temperature, fan speed, and leakage detection.
Description of different operating modes (Fan, Cooling, Heating, Auto, Drying, Forced) and their specific rules.
Table mapping operation lamp flashes and display codes to specific error conditions and LED statuses.
Detailed troubleshooting steps for common error codes like EEPROM, communication, fan speed, and refrigerant leakage.
Procedure to measure the resistance of temperature sensors using a tester.
Method to measure the resistance values of compressor windings using a tester.
To Next Page