Need help?Do you have a question about the Midea MOB01-09HFN1-QRD0GW and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 9000 BTU |
| Type | Portable |
| Operating Modes | Fan |
| Included Accessories | Window kit |
General safety instructions to prevent injury and property damage.
Critical warnings regarding installation, electrical hazards, and product operation.
Lists indoor and outdoor unit models along with their respective capacities.
Detailed physical dimensions for the indoor unit across different models.
Recommended torque values for tightening pipe connections during installation.
Selection criteria for power cord cross-sectional area based on appliance current.
Procedure for system evacuation using a vacuum pump to remove air and moisture.
Method for purging air from the system using refrigerant.
Steps to recover refrigerant into the outdoor unit before indoor unit servicing.
Procedure for purging air after the indoor unit has been repaired.
Process for evacuating the entire system before outdoor unit servicing.
Steps for recharging the system with refrigerant after outdoor unit repair.
Defines the suitable room and outdoor temperature ranges for various operating modes.
List of abbreviations used for sensors and system functions.
Explanation of icons shown on the indoor unit's display board.
Description of what the digital display shows in different operating states.
Indicates the status and activation of the optional Wi-Fi control feature.
Delay applied before the compressor restarts after a power interruption.
Protection against overheating of the compressor's top component.
Triggered when compressor discharge temperature exceeds a safe limit.
Protection activated if the indoor fan speed drops critically low.
Protective functions for the inverter module against electrical and thermal stress.
The indoor fan activates after a short delay when the unit starts.
Enables preheating of the compressor in cold ambient conditions.
Safeguards against open or short-circuited temperature sensors.
Detects refrigerant leaks during cooling operation to prevent damage.
Details on how the fan operates independently or in conjunction with other modes.
Explanation of the cooling mode, including compressor and fan control.
Conditions and rules governing the compressor's operation during cooling.
How outdoor fan speed is adjusted based on ambient temperature.
Rules for indoor fan speed selection and operation in cooling mode.
Protection mechanism to prevent overheating of the condenser.
Detailed description of the heating mode, including compressor and fan control.
Conditions and rules governing the compressor's operation during heating.
How outdoor fan speed is adjusted based on ambient temperature in heating.
Rules for indoor fan speed and anti-cold air function in heating mode.
Description of the defrosting cycle and its indicators.
Protection based on the evaporator coil's temperature.
Details on automatic mode selection based on temperature differences.
Characteristics of the drying mode, including fixed fan speed and louver angle.
Explanation of forced cooling and forced auto operation modes.
How the unit automatically resumes operation after a power interruption.
Specific operational behavior of the 8°C heating feature.
Essential safety precaution for discharging electrical energy from capacitors.
Procedure for measuring the resistance of various temperature sensors.
To Next Page