Optional Controller MCAC-UTSM-2008-05
112 Control
NAME AND FUCTION OF INDICATORS ON THE CONTROLLER
1. Operation mode indication: When press” MODE” button, the following mode can be selected in circle.
Auto Cool Dry Heat Fan only Auto.
Auto→ Cool→ Dry →Heat→ Fan only →Auto
For cooling only model, heat mode is skipped.
2. Timer: When adjust setting on time or only on time is set, the “ON” is lighted. When adjust setting off
time or only off time is set, the” OFF" is lighted. If on and off timer are both set, the “ON” and “OFF” are
both lighted.
3. Follow me function: There is a temperature sensor inside the wire controller, after setting temperature, it
will compare the two temperatures, and the space of wire controller will be the same as setting
temperature. It is available under cooling, heating, auto mode.
4. ON/OFF indication: When it is on, the icon display, otherwise it is extinguished.
5. Fan speed indication: There are four fan modes: low, middle, high, auto. For some models, no middle
fan then the middle fan is seen as high speed.
6. Lock: When the"LOCK"button is pressed, the icon appears and other buttons is unable, press again, the
icon disappears.
7. Temperature display zone: Generally it displays setting temperature; it can be adjusted by press
temperature button▲and▼ .But in fan mode, no display here.
To Next Page
Loading...
