Midea MPPD33H User Manual

05
Model:
RG10F2(B1)/BGEFU1（Fresh feature is not available）
RG10F3(B1)/BGEFU1
Turns indoor unit’s LED display and
air conditioner buzzer on and off
(model dependent), which create a
comfortable and quiet environment.
LED
°C/°F
The temperature display
between the °C & °F.
SLEEP
Saves energy during sleeping
hours.
ON/OFF
SET
Turns the unit on or off.
MODE
OK
Scrolls through operation modes
as follows:
AUTO 
COOL 
DRY 
HEAT  FAN
TIMER ON
TIMER OFF
Increases temperate in
1°C (1°F) increments.
Max. temperature is
30°C (86°F ).
TEMP
TEMP
Used to confirm the selected
functions
Decreases temperature
in 1°C(1°F) incr
ements.
Min. temperature is
17°C(62°F).
Sets timer to turn unit off
(see How to Use Basic
Functions for instructions).
Scrolls through operation
functions as follows:
Fresh( ) I Sense( )
AP mode( )
Fresh...


The selected symbol will
flash on the display area,
press the OK button to
confirm.
Sets timer to turn unit
on (see How to Use Basic
Functions for instructions).
SHORTCUT
Used to restore the current
settings or resume previous
settings.
SWING
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED HIGH



Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
NOTE: Please do not select
HEAT mode if the machine you
purchased is cooling only type.
Heat mode is not supported by
the cooling only appliance.

Midea MPPD33H Specifications

General

Brand	Midea
Model	MPPD33H
Category	Air Conditioner
Language	English