09
Setting the TIMER
TIMER ON setting
TIMER OFF setting
TIMER ON & OFF setting(example)
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
Press TIMER ON button to
initiate the ON time sequence.
Press up or down button for
multiple times to set the desired
time to turn on the unit.
Point remote to unit and wait
1sec, the TIMER ON will be
activated.
x5
1sec
Press Temp. up or down button for
multiple times to set the desired
time to turn off the unit.
Press TIMER OFF button to
initiate the OFF time sequence.
Point remote to unit and wait
1sec, the TIMER OFF will be
activated.
1sec
x10
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with
each press, up to 10 hours. After 10 hours and up to 24, it will increase in 1 hour increments.
( For example, press 5 times to get 2.5h, and press 10 times to get 5h,) The timer will revert to
0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
Current
time 1PM
2:00PM 3:00PM
4PM 5PM
6PM
Timer starts
Unit turns
ON
Unit turns
OFF
2.5 hours later
5 hours later
3:30PM
Example: If current timer is
1:00PM, to set the timer as above
steps, the unit will turn on 2.5h
later (3:30PM) and turn off at
6:00PM.
Keep in mind that the time periods you set for both functions refer to hours after the current
time.
xn
xnxn
To Next Page
Loading...
Need help?
General
