11
Refrigerator
Safety
Operating
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
Upper hinge
Hinge cover
Screws
Cover plate
5.
Remove the three screws that secure the center hinge to the
refrigerator, then remove the center hinge. Save the screws to reuse.
7.
Take the left-side self-locking block and stopper from the accessory
bag and install them in the bottom left side of the refrigerator door
as shown below.
6.
Remove the sleeves and hole caps from the refrigerator door, then
install them in the opposite side of the door.
Sleeve
Door
stopper
Self-locking
block
Sleeve
Door
stopper
Self-locking
block
To Next Page
Loading...
