16
Refrigerator
Safety
Operating
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
CONTROLS
DISPLAY
Once initially powered on, the display screen is on full display for 3
seconds.
The refrigerator default setting is medium, and the LED2 and LED 5
indicator will be illuminated.
This is normal operation display.
In case of a failure, the appropriate LED light will flash in sequence.
In case of no failures, the current temperature setting of the refrigerator
will be on display.
Each time the temperature setting is pressed once,
the temperature setting changes one time.
After the temperature setting has been completed, the refrigerator will
run according to the set value after 25s.
From left to right, the temperature is lower.
The order of coldness settings is as follows:
TEMPERATURE SETTING
Fridge Setting
Fridge LED 6 cool indicator
Fridge LED 5 indicator
Fridge LED 4 coolest indicator
Freezer Setting
Freezer LED 3 cold indicator
Freezer LED 2 indicator
Freezer LED 1 coldest indicator
LED2
LED1LED3LED4LED6
LED5
To Next Page
Loading...
Need help?
General
