EasyManua.ls Logo

Midea MRC-60HWN1-M13L User Manual

Midea MRC-60HWN1-M13L
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION INSTRUCTIONS
PACKAGE HEAT PUMP & AIR CONDITIONER
WARNING
These instructions are intended as an aid to qualified,
licensed service personnel for proper installation,
adjustment and operation of this unit. Read these
instructions thoroughly before attempting installation
or operation. Failure to follow these instructions may
result in improper installation, adjustment, service or
maintenance possibly resulting in fire, electrical shock,
property damage, personal injury or death.
RECOGNIZE THIS SYMBOL AS AN INDICATION OF IMPORTANT SAFETY INFORMATION
DO NOT DESTROY THIS MANUAL
Please read carefully and keep in a safe place for future reference by a serviceman.
FEATURING R-410A
13 SEER SERIES - (2-5Tons)
Question and Answer IconNeed help?

Do you have a question about the Midea MRC-60HWN1-M13L and is the answer not in the manual?

Midea MRC-60HWN1-M13L Specifications

General IconGeneral
ModelMRC-60HWN1-M13L
Cooling Capacity6.0 kW
RefrigerantR410A
Power Supply220-240V, 50Hz
Energy Efficiency Ratio (EER)3.21
Noise Level (Indoor Unit)42 dB(A)
Weight (Outdoor Unit)35 kg
TypeSplit Air Conditioner
Dimensions (Outdoor Unit)800 x 333 x 554 mm

Summary

Safety Information and Precautions

Safety Alert Symbol Definitions

Explains the meaning of WARNING and CAUTION symbols indicating potential hazards.

Qualified Personnel Installation Mandate

Emphasizes that installation must be performed by qualified personnel only.

Warranty Voidance by Unauthorized Parts

Warns that using unauthorized components can void warranty and cause hazards.

Electrical Safety During Maintenance

Mandates disconnecting power before maintenance to prevent severe electrical shock or death.

Ductwork Connection Hazard Warning

Prohibits connecting return ductwork to other heat-producing devices due to fire and CO risks.

Additional Safety Warnings

Grounding Requirement for Electrical Safety

Stresses the necessity of permanent grounding to prevent fire or electrical shock.

Approved Electric Heater Kit Usage

Specifies that only manufacturer-supplied electric heaters are tested and approved for use.

Unit Inspection and Installation Preparation

Filters and Electrical Wiring

Electrical Safety During Wiring

Crucial warning to disconnect power before any electrical work to prevent severe shock or death.

Grounding and Control Wiring

Essential Unit Grounding Procedures

Details the mandatory grounding procedures to ensure electrical safety.

Wiring Labeling for Servicing

System Operation and Components

System Protection Features

Describes various protection mechanisms within the system.

AC System Discharge Temperature Protection

Covers AC system protection against high discharge temperatures, specifying compressor off/on points.

HP System Fault and Temperature Protection

Details protection for HP systems against sensor faults and high discharge temperatures.

Advanced System Operation Modes

Operation Check-Up and Troubleshooting

Troubleshooting Common Issues

Guidance for diagnosing and resolving common unit problems.

Troubleshooting Safety Precautions

Critical safety warning about performing troubleshooting with the control box open and power on.

Related product manuals