Midea MRCT-100CWN1-D(C) - Belt Tension Is Measured by Belt Tension Indicator; Regulating Belt of Tension

Midea R410A Tropical ClimaCreator Series Rooftop Package 220V 3Ph 60Hz MCAC-RTT6S-201701
83
Regulating belt of tension
Refer to the following figure, loose 2 bolts, and move the electric motor to adjust belt tension. These
two bolts are used for precision adjustment.
Belt tension is measured by belt tension indicator
 Calculate the deflection, deflection (L) = A/64.
Notes: L=A/64
Model
A (mm)
MRCT-100CWN1-D(C)
380
MRCT-150CWN1-D(C)
560
MRCT-200CWN1-D(C)
580
MRCT-250CWN1-D(C)
480
 Measure the belt deflection force, the force should be between the values shown in the
following lists.
 The belt which is too tight or too loose may generate noise and be harmful to the unit.
Belt section
For required to deflection
Small pulley diameter
Newton
Kilogram-force
SPA
80mm~132mm
25N~35N
2.5kg.f~3.6kg.f