INSTALL WATER FILTER
REMOVE BYPASS PLUG
2.
1.
Turn o the water supply to refrigerator.
Squeeze the sides of the filter cover where marked, and then pull
downward to open the cover.
Filter cover
3. Turn the bypass plug counterclockwise, and then pull out to remove.
IMPORTANT: Keep the bypass plug for later use. The ice maker and
dispenser will not operate unless either a water filter or the bypass
plug is properly installed.
Bypass plug
Refrigerator
Safety
Operating
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
To Next Page
Loading...
