DM12-01.01.09en Oasis On-off
Service manual 49
the user press “Self Clean” button on remote controller, firstly, indoor unit runs in fan only mode for a
while, then low heat operation and finally runs in fan only again. This function can keep the inside of
indoor unit dry and prevent breeding of mold.
10.4.12 Refrigerant Leakage Detection
With this new technology, the display area will show “EC” when the outdoor unit detects refrigerant
leakage.
10.4.13 Louver Position Memory Function
When starting the unit again after shutting down, its louver will restore to the angle originally set by the
user, but the precondition is that the angle must be within the allowable range, if it exceeds, it will
memorize the maximum angle of the louver. During operation, if the power fails or the end user shuts
down the unit in the turbo mode, the louver will restore to the default angle.
10.4.14 Clean Air function
This air conditioner is equipped with Plasma Dust Collector. The Plasma Dust Collector generates a
high voltage ionization zone, through which the air is converted to plasma. Inside the air most of the
dust, smoke, and pollen particles are captured by the electrostatic filter.
To Next Page
Loading...
