Need help?Do you have a question about the Midea MSE-12HRN1-BQ8W and is the answer not in the manual?
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Type | Split System |
| Indoor Noise Level | 24-38 dB |
| Power Consumption (Heating) | 1050 W |
| Noise Level (Indoor) | 24-38 dB |
Instructions to prevent injury and property damage.
General warnings related to installation and product usage.
Lists functions related to the indoor unit.
Lists functions related to the outdoor unit.
Provides dimensions for the indoor unit.
Provides dimensions for the outdoor unit.
Diagram of the refrigerant cycle in cooling mode.
Diagram of the refrigerant cycle in heat pump mode.
Defines operating temperature limits for cooling.
Defines operating temperature limits for heating.
Wiring diagram for the indoor unit.
Wiring diagram for the outdoor unit.
Specifies torque values for fasteners during installation.
Guidance on selecting power cord specifications.
Details pipe size, length, and elevation limits.
Procedure for removing air from the refrigeration piping.
Procedure for pumping down refrigerant during re-installation.
Procedure for re-purging air after re-installation.
Procedure to balance refrigerant in the system.
Procedure for evacuating the refrigeration system.
Procedure for charging the system with refrigerant.
Specifies operating voltage, frequency, and ambient conditions.
Defines symbols and meanings for sensor readings.
Lists various operational functions of the unit.
Details protection mechanisms and error conditions.
Describes the fan-only operational mode.
Details operation and protections in cooling mode.
Describes operation and protections in dehumidifying mode.
Details operation and protections in heating mode.
Conditions and actions for defrosting.
Describes automatic mode selection based on temperature.
Details the force cooling operation mode.
Describes sleep mode operation for cooling, heating, and auto.
Function to restore previous settings after power failure.
Details the turbo mode for faster temperature achievement.
Description of the ionizer function.
Function to operate based on remote sensor.
Description of the display board indicators and their meaning.
Lists failure phenomena and corresponding indicator status.
Flowchart for diagnosing issues when the unit won't operate.
Troubleshooting steps for operational resetting issues.
Troubleshooting steps for uncontrolled indoor fan speed.
Troubleshooting for indoor room, evaporator, and outdoor condenser sensor errors.
Troubleshooting for compressor over current protection.
Troubleshooting for EEROM error, indicating a defective indoor PCB.
Troubleshooting steps for outdoor unit protection faults.
Troubleshooting steps for indoor unit communication errors.
To Next Page