Why is the operation lamp flashing and the timer lamp off on my Midea Air Conditioner?
If the operation lamp flashes and the timer lamp is off, check the connector connections and repair them if necessary. Also, verify if voltage is being applied to the fan motor. If not, the indoor PCB might be defective. Finally, the fan motor itself could be defective.
What does it mean when the operation lamp is on and the timer lamp flashes on my Midea Air Conditioner?
If the operation lamp is on and the timer lamp flashes, this indicates an EEROM error, suggesting that the indoor PCB is defective.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Type | Split System |
| Energy Efficiency Ratio (EER) | 3.21 |
| Indoor Noise Level | 36 dB(A) |
| EER (Cooling) | 3.21 W/W |
| Noise Level (Indoor) | 36 dB(A) |
Essential safety guidelines to prevent injury and property damage during operation and installation.
Critical warnings regarding electrical hazards, improper installation, and misuse of the appliance.
Step-by-step guide for initial installation, including leak testing and evacuation.
Details various protection mechanisms like time delay, fan speed, current, communication, and error detection.
Lists error codes displayed on the indoor unit and their corresponding failures.
Provides step-by-step troubleshooting procedures for common issues like fan speed, sensors, and protection errors.
To Next Page