Electrical
3.
3.1 Wireless Remote Controller
3.1.1
Remote Controller Specifications
Introduction of Function Buttons on the Remote Controller
1. Adjust
2. Adjust
3. MODE
NOTE: No heating mode for cool only type unit.
4. VERT SWING:
automatically if push this button.
AIR DIRECTION
angle for each press.
5. HORIZ SWING:
Controller
3.1 Wireless Remote Controller
3.1.1
RG51C/E
Remote Controller Specifications
Lowest Voltage of CPU Emitting
Environment Temperature Range
Introduction of Function Buttons on the Remote Controller
1. Adjust
2. Adjust
3. MODE: Once pressing, running mode will be selected in the following sequenc
NOTE: No heating mode for cool only type unit.
4. VERT SWING:
automatically if push this button.
AIR DIRECTION
angle for each press.
5. HORIZ SWING:
3.1 Wireless Remote Controller
RG51C/E
Remote Controller Specifications
Lowest Voltage of CPU Emitting
Environment Temperature Range
Introduction of Function Buttons on the Remote Controller
4
Adju st
Mod e sett in g
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
: Once pressing, running mode will be selected in the following sequenc
NOTE: No heating mode for cool only type unit.
4. VERT SWING:
Used to stop or start horizontal louver movement. The louver will swing up and down
automatically if push this button.
AIR DIRECTION
:
Used to set the desired up/down air flow direction. The louver changes 6 degree in
angle for each press.
Used to stop or start vertical louver movement.
3.1 Wireless Remote Controller
Remote Controller Specifications
Lowest Voltage of CPU Emitting
Environment Temperature Range
Introduction of Function Buttons on the Remote Controller
2
4
5
3
Adju st
Mod e sett in g
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
: Once pressing, running mode will be selected in the following sequenc
NOTE: No heating mode for cool only type unit.
Used to stop or start horizontal louver movement. The louver will swing up and down
automatically if push this button.
Used to set the desired up/down air flow direction. The louver changes 6 degree in
Used to stop or start vertical louver movement.
3.1 Wireless Remote Controller
Lowest Voltage of CPU Emitting
Signal
Environment Temperature Range
Introduction of Function Buttons on the Remote Controller
AU TO
COOL
DR Y
HE AT
MO DE
SWING
SWING
AI R
DIRECTI ON
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
: Once pressing, running mode will be selected in the following sequenc
NOTE: No heating mode for cool only type unit.
Used to stop or start horizontal louver movement. The louver will swing up and down
Used to set the desired up/down air flow direction. The louver changes 6 degree in
Used to stop or start vertical louver movement.
COOL
Introduction of Function Buttons on the Remote Controller
ADJUST
ECO
ON/O FF
RESET LOC K
SET TEM PERATURE ( C)
DIRECTI ON
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
: Once pressing, running mode will be selected in the following sequenc
NOTE: No heating mode for cool only type unit.
Used to stop or start horizontal louver movement. The louver will swing up and down
Used to set the desired up/down air flow direction. The louver changes 6 degree in
Used to stop or start vertical louver movement.
DRY
8m (when using 3.0 voltage, it can get 11m)
Introduction of Function Buttons on the Remote Controller
FAN
HIGH
MED
LOW
TIMER ON
TI MER OFF
SET TEM PERATURE ( C)
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
: Once pressing, running mode will be selected in the following sequenc
Used to stop or start horizontal louver movement. The louver will swing up and down
Used to set the desired up/down air flow direction. The louver changes 6 degree in
Used to stop or start vertical louver movement.
HEAT
8m (when using 3.0 voltage, it can get 11m)
-5℃~
1
7
8
9
10
11
12
Adj ust
ON/ OFF
TI MER
TIME R
L ock
Econom ic ope r at ion
Fan speed se tt ing
Re s et
13
: Decrease the set temp. Keeping pressing will decrease the temp with 1
: Increase the set temp. Keeping pressing will increase the temp with 1
: Once pressing, running mode will be selected in the following sequence:
Used to stop or start horizontal louver movement. The louver will swing up and down
Used to set the desired up/down air flow direction. The louver changes 6 degree in
FAN
8m (when using 3.0 voltage, it can get 11m)
℃
ON
OF F
L ock
Econom ic ope rat ion
Fan speed se tt ing
Re s et
: Decrease the set temp. Keeping pressing will decrease the temp with 1
℃
per 0.5s.
: Increase the set temp. Keeping pressing will increase the temp with 1
℃
Used to stop or start horizontal louver movement. The louver will swing up and down
Used to set the desired up/down air flow direction. The louver changes 6 degree in
8m (when using 3.0 voltage, it can get 11m)
Used to stop or start horizontal louver movement. The louver will swing up and down
Used to set the desired up/down air flow direction. The louver changes 6 degree in