Optional Controller MCAC-UTSM-2008-05
116 Control
Name and Function of Indicators on CCM LCD Screen
1) Common Display Data
Common display data will be indicated in all display pages.
a. Figure
means CCM is in network control with PC or Gateway.
b. Figure
means CCM is in communication connection with Function Module.
c. Figure
means CCM is in communication connection with Message Remote Control Module.
d. Figure
means CCM is in communication connection with Telephone Remote Control Module.
e. If CCM is in normal communication with NIM, then (Blank), ●,
, will be displayed in dynamic
circulation. Otherwise, no any display.
f. Lock Symbol
means the CCM is in Lock state or the buttons are in Lock state. ON means the
buttons are in Lock state or both CCM and Buttons are in Lock state, and 0.5 second flash means the
CCM is in Lock state.
g. When setting page layout, if the selected air-conditioner is in Remote Controller Lock state (in case that
several air-conditioners are in operation, if only one is in Remote Controller Lock state, then that means
in Lock state.), symbol
will display steadily. If in Mode Lock state, symbol will flash in
0.5Hz. If Remote Controller Lock state and
Mode Lock state exist at the same time, symbol
will display steadily.
2) Display Data Treatment
Data Display area adopts 7-segment code, and there are 5 groups of 2-digital 7-segment display.
To Next Page
Loading...
