Safety
Precautions
Page 6
Operation of Current Device
RESE T
TEST
Plug in & press
RESET
The power supply cord contains a current
device that senses damage to the power
cord. Test your power supply cord as
follows:
1. Plug in the air conditioner.
2. The power supply cord will have TWO
buttons on the plug head. Press the
TEST button. You will notice a click as
the RESET button pops out.
3. Press the RESET Button. You will
notice a click as the button engages.
4. The power supply cord is now
supplying electricity to the unit. (On
some products this is also indicated
by a light on the plug head.)
Do not, under any
circumstances, cut,
remove or bypass the
grounding prong.
Grounding type wall receptacle
Power supply cord with 3-prong grounding
plug and current detection device.
NOTICE
The power supply cord with this air
conditioner contains a current detection
device designed to reduce the risk of
fire.
In the event that the power supply cord
is damaged, it can not be repaired. It
must be replaced with a cord from the
manufacturer.
NOTICE
• Do not use this device to turn the unit on or o.
• Always make sure the RESET button is pushed in for correct operation.
• The power supply must be replaced if it fails to reset when either the TEST button
is pushed, or it can not be reset. Please contact Customer Service.
To Next Page
Loading...
Need help?
General
