7
SAFTEY FEATURES
Thermal cut-off: This heater includes a thermal cut-off that shuts the heater off if it
overheats due to abnormal conditions. If this occurs, turn the heater off, unplug it,
and inspect and remove any objects on or adjacent to the heater. Allow it to cool for
a few minutes, and then plug it back in and resume normal operation.
Tip-over switch: This heater includes a safety tip-over protection feature that will
shut the heater off in case it is tipped over. If, at any time, the heater tips over,
please put the heater back in the upright position. The heater will resume its normal
operation.
1. The electric heater should be cleaned regularly to wipe out the dust on the
surface of flanges. As this may influence the radiating efficiency.
2. Disconnect electricity supply and allow radiator to cool, wipe out dust with a
soft damp cloth. Do not use detergent or abrasives.
3. Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces
getting rusty, because of damage of the paint coat.
CLEANING AND MAINTENANCE INSTRUCTION
[Memory Function]
When the power of the heater is not cut off or the heater keeps under Standby Mode,
it can memorize the last working mode and setting temperature and works at the
setting temperature after turning on, the memory data will be reset if the power
supply of the heater is cut off, and the setting temperature of the heater recovers to
the default setting (Normal Mode, high, setting temperature is 35ºC) when turning on.
MAIN TECHNOLOGY SPECIFICATIONS
Power supply: AC220-240V ~ 50Hz
MODEL
POWER REGULATION RANGE (W)
NY1507-13A1L
NY2009-13A1L
NY2311-13A1L
600 900
800 1200
LO MED HI
1000
1500
2000
23001300
NY2513-13A1L 1000 25001500
To Previous Page
Loading...
Need help?
General
