Installation of the water tank
If the water is added as
previously described, the
water tank cover is covered
with the water tank. When
installing back to the lower
shell, it is necessary to ensure
that the two buckle grooves
on the water tank and the
surface plate are in place.
Atomizing direction
adjustment
The atomization outlet can be
rotated by 360°, which can
be adjusted according to
your own needs, so that
atomizing direction satisfies
your needs.
ATTENTION: When the device has run out of water it will enter into the
lack of water mode. Pour water into the water tank and the humidifier
will resume working.
Page 7
To Next Page
Loading...
Need help?
General
