Features
Indoor Units 25
1.7 Built-in display board
The standard indoor unit can be controlled by wired controller.
There is a display board with a receiver in the E-box. Move out the display, and fix it in other place, even
in the distance of 2m. The unit will realized remoter control.
The wired controller and the display board can display the error code or protection code when the chips
detect some failure.
1.8 Twins Combination
The units can be installed as Twin systems: one outdoor unit can connect with two indoor units. The
indoor units can be combined in any of the different available ratings.
Wired Controller (Standard)
Remote Controller (Optional)
To Next Page
Loading...
Need help?
General