Push slightly
After taking the Hepa out of the tank, clean
it with fresh water, dry it completely and
then install it back to the sewage tank.
6
After removing the sewage, install the
sewage tank back to the machine until the
click sound could be heard.
7
Pour out the sewage from the side of the
tank as shown in the figure, and if you find
any stubborn dirt on the inner wall of the
tank, please clean it directly with a
cleaning brush;
4
Remove the Hepa from top of the
sewage tank.
5
HEPA
Use of Product
To Next Page
Loading...
Need help?
General
