Need help?Do you have a question about the Midea M Series and is the answer not in the manual?
General| Loading Type | Front Load |
|---|---|
| Spin Speed | Varies by model (e.g., 1200 RPM, 1400 RPM) |
| Inverter Technology | Yes |
| Washing Capacity | 8 kg |
| Display Type | LED |
| Special Features | Quick Wash, Delay Start |
| Capacity | 8 kg |
| Dimensions (HxWxD) | 85 cm x 60 cm x 60 cm |
| Color | White |
Covers use of genuine parts, grounding, and observing warnings during servicing procedures.
Details on parts assembly, wiring, post-servicing safety checks, and insulation resistance testing.
Explanation of warning and caution symbols for electrical safety and proper product usage.
Instructions for removing the back cover, earth screws, capacitor screws, and air pipe.
Steps for removing the insulating bag, wire connector, top cover, and main control board (PCB).
Procedure for removing the door lid, outer tub cover, impeller, and spin tub cover.
Steps for removing the out tub, attached parts (motor, clutch), and base plate.
Explanation of error codes for machine not working, water supply, lid open, and imbalance faults.
Troubleshooting steps and checks for the overflow alarm condition.
Diagnosing and resolving inflow, drain, lid, imbalance, and overflow alarms using flowcharts.
Addressing issues like no start, slow fill, overflow, agitation, drain, spin, and electric leakage.
Parameters for checking motor, capacitor, drain motor, and inflow valve resistance with a multimeter.
List of common tools and kits required for performing washing machine maintenance and repairs.
Provides key technical specifications and details for the washing machine.
To Next Page