Midea M Series

11
ITEM PICTURE HOW TO DISASSEMBLE
11 Out tub
①
Firstly make suspension
rods and the outer tub
subassembly
separately.（
Remember
the rods
installing order.
）
②
Take out the out tub
12 Parts attached on
the out tub
Use cross
screwdriver and
Sleeve
①Remove the motor screws,
and take out motor.
②
Remove the bracket
screws, and take out
bracket.
③
Remove the clutch body
subassembly screws, and
take out clutch body
subassembly.
④Firstly make retractor and
the clutch body
subassembly separately.,
remove retractor screws,
and take out retractor
13 Base plate
Use cross
screwdriver
①
Remove the base plate
screws, and take out the
base plate.
3 UNPACKING WAYS OF MAIN PARTS